Silicone Fruit Feeder Pouch
For OEM & ODM Projects
- Product: Silicone Fruit Feeder Pouch (110 ml, 5 colors)
- Material: food-grade platinum-cured silicone, -40°C to 230°C
- Registered with U.S. FDA
- Registration No. 3023263259
- Verified via FDA.gov

Six reasons this feeder earns repeat orders
Soft Flow-Control Spout
The slit silicone spout releases liquid only when your baby sucks or gums it – never from gravity or squeezing. Beginners self-feed without flooding, and parents skip the chasing-with-a-spoon stage.
Platinum-Cured Silicone Body
One-piece LSR molding with no glued joints and no mesh sleeve to replace. Complies with 21 CFR 177.2600; LFGB-tested material available for EU programs.
Dual Handles + Internal Straw
Two loops sized for 6-to-12-month grips mean either hand works. The handles double as a stand – set it down and the spout stays off the table – while a thin straw reaches the last of the puree.
Molded ml Graduations
10-110 ml scale molded into the body, so caregivers can see exactly how much is left – a small detail that shows up in every product photo and review.
-40°C to 230°C
Freeze a filled feeder for teething relief, then steam-sterilize or boil the same unit after use. Freezer, boiling water, steam, and dishwasher safe.
Three Parts, No Mesh
Bottle, straw, and spout collar come apart in seconds and rinse clean. Nothing to unscrew into five pieces at 3 a.m., and nowhere for puree to hide.

Everything a buyer needs on one card
| Material | 100% food-grade platinum-cured silicone (LFGB-compliant material available) |
| Capacity | Approx. 110 ml, molded graduations at 10 ml steps (10-110 ml scale) |
| Standard colors | White, yellow, coral pink, orange, green; Pantone matching for OEM |
| Temperature range | Approx. -40°C to 230°C; freezer, boiling water, steam, dishwasher safe |
| Design | One-piece bottle, soft slit spout, internal silicone straw, dual handles, snap-on cap |
| Packaging | Individual OPP bag, master carton; custom retail packaging optional |
| MOQ | 500 pcs for OEM (custom color/logo/packaging); 1,000 pcs for standard |
| Lead time | ~30 days standard; ~45 days for fully custom programs |
Fill
Unscrew the wide mouth and pour in a thin puree, diluted juice, or very soft mashed fruit – thin enough to flow up the straw.
Hand Over
Baby grips both handles and works the spout. Flow comes only from sucking and gumming, so portions stay small and mess stays inside.
Clean
Three parts separate in seconds and are all dishwasher, boiling-water, and steam-sterilizer safe.


Custom programs backed by paperwork you can hand to customs
🎨 What you can customize
- Pantone color matching from 500-piece orders
- Debossed logo on the cap or handle
- Two-tone bottle and handle combinations
- Retail-ready packaging with your artwork
- Full custom tooling for a proprietary shape
Everything runs in our GMP workshops on the same 30-to-45-day rhythm as catalog programs. See the design-to-shipment walkthrough.
📋 Compliance on file
- FDA-registered facility (No. 3023263259)
- 21 CFR 177.2600 material compliance for the US
- LFGB migration testing for Europe
- EN 14372 mechanical standard for feeding utensils
- ISO 13485 & ISO 9001 factory quality systems
Every batch passes IQC, IPQC, and OQC gates with records. Mapping requirements by market? Read our FDA vs LFGB vs EN71 comparison.
Want to verify any of this on site? Our factory audit checklist tells you exactly how – including on us.

The five questions buyers ask first
What age is a silicone fruit feeder for?
Most families start around 6 months, when babies begin solids and can grip the handles. It doubles as a chilled soother for teething when filled and frozen, under supervision. Age grading on packaging follows your market’s labeling rules.
Can I put frozen fruit inside?
You can freeze a filled feeder – pureed fruit or diluted juice turns it into a cold soother for sore gums. For the filling itself, use thin purees or very soft mashed fruit that can flow up the straw; hard chunks belong in a mesh-style feeder, not this one. The silicone is rated to roughly -40°C.
How do you clean a silicone fruit feeder?
Unscrew the collar and pull the straw free – three parts, no mesh to replace – then run everything through the dishwasher or a steam sterilizer. All parts are boiling-water safe.
What is the MOQ for custom colors or my logo?
500 pieces covers Pantone color matching and debossed logo options. Standard colors in our catalog start at 1,000 pieces.
Do you provide test reports for the US and EU?
Yes. Material compliance documentation for 21 CFR 177.2600, LFGB migration reports, and EN 14372 testing can be arranged per shipment, and our FDA facility registration number is publicly verifiable.
Ready to add the fruit feeder pouch to your line?
Free sample for qualified buyers · OEM from 500 pcs · Reply within 24 hours
You may also be interested in our silicone teethers, suction bowls, and silicone bibs.